Product Categories
Contact Us

Address:4fl,J building, No.1, North Rd, Shangxue Tech Park Bantian ,Longgang District, Shenzhen,518129, P.R.China

Email: ankasales6@szcaj.com

Tel: +86-755-89603006

Fax: +86-755-89603481

Home > Products > fire alarm bell factory

fire alarm bell factory

  • temperature alarm detector AJ-523

    Contact Nowtemperature alarm detector AJ-523The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel. Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption. The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel. Heat detector and smoke & heat detector combine a photoelectronic sensing chamber and a temperature heat detector.Read More

  • Industrial 16 Zone 24v Fire Security Systems

    Contact NowIndustrial 16 Zone 24v Fire Security SystemsThis is 16 zone conventional fire alarm system. 16 zone fire alarm control panel, it have 16 zone, each zone can connect 25pcs 2 wire devices, such as smoke detector, heat detector, pull station, etc. Suit for home, small factory, small hotel, etc. ANKA Sci-Tech Co.,Ltd is one of the leading...Read More

  • AC powered Smoke Detector Alarm

    Contact NowAC powered Smoke Detector AlarmThis detector detects the smoke by a couple of infrared diodes. The principle of detecting is granule in the smoke can reflect infrared light. Infrared diodes are placed in the special chamber. The chamber can shield external light, but don't affect the smoke into it. While have no smoke, the diode can receive very weak infrared light. When the smoke entering the chamber, diode can receive more and more light, when the smoke attains the certain density, the detector can give out alarm signal. In order to reduce the interference and lower power consumption, the emitting circuit adopts the pulse signal. The detector adopts the special structure design and ASIC, has the dustproof, mothproof and anti outside light interference feature etc.Read More

Feedback
ANKA Sci-Tech Co.,Limited
ANKA Sci-Tech Co.,Limited