AJ-VB01 Wireless Interlinked Vibration Detector

Description

Wireless Interlinked Vibration Detector

Introduction:

is a wireless interconnected vibration detector.It uses advanced signal analysis and processing technology to ensure product stability from the design. When pre-connected detectors are triggered, such as smoke detectors or sound and light alarms, the wireless vibration detectors will receive signals and generate vibration alarms, effectively reminding you

Specification:
Operating voltage：DC3V battery
Static current <6uA
Alarm current <80mA
Alarm indicator LED & vibration
Wireless frequency:433Mhz
Wireless distance: Indoor 20m, outdoor 200m
Working Temp -10℃-60℃
Battery life < 2 years
Humidity 0-80%RH(no congelation)
Installation Place on a table or pillow
Dimension 112mm*21mm

Operation
1 Power on Make sure the vibration detector is powered on by 2 pieces of DC1.5V battery. The LED will flash 3 times, and the detector comes into normal working status.
2 TEST: Press the button, the red LED will flash and the detector will vibrate, and the smoke detector that is already interlinked with the vibrator will sound at the same time. The testing period is about 15 seconds. Pressing the button
again can stop the vibration. You can only test again after 12 seconds.
3 Pairing: Same pairing process with interconnected smoke detectors.
Firstly, press and hold the button of device 1 that waiting to be paired, after the red light flashes twice, release it.
If the detectors are already interlinked with other devices, the red led will flash slowly about three times. if it is not be interlinked to your target device, you can clear the pair according to the instruction of step

4.If device one has not been linked before, the red led will flash about 2 minutes, which means waiting for paring. Secondly, press and hold the button of device 2 that prepared to be connected with device 1, after the red
light flashes and the device vibrate three times, releasing it.

Click below to know more about the detectors that can be interlinked by the siren

Clear Matching: Press and hold the button after the red light flashes and the device vibrates four times, release it. waiting for the light to flash for 3 times, and clear successfully.

Alarming: When the vibration detector received the signals from other interlinked device Clear Matching: Press and hold the button after the red light flashes and the device vibrates four times, release it. waiting for the light to flash for 3 times, and clear successfully.

Low Battery: The vibration detector will vibrate and flash every 1 minute when the battery voltage is less than 2.6Volt.

Wireless interconnected smoke alarm

WIFI interconnected smoke alarms with mobile App notification optional.  click for more information

Wireless interconnected Carbon monoxide detector 

Contact to get the price list.

As a smoke detector manufacturer that has focused on smoke alarm manufacture since 2007. Stand alone 10 years smoke detector, Wifi/Zigbee smoke detector, Lora smoke detectors, NB-IoT smoke detectors. Carbon monoxide detectors are all available.

OEM service welcomed. You can e-mail us freely with your requirements.