AJ-VB02 Wireless Interlinked Vibration Detector

Description

Wireless Interlinked Vibration Detector

Introduction:

is a wireless interconnected vibration detector. It uses advanced signal analysis and processing technology to ensure product stability based on the design. When pre-connected detectors are triggered, such as smoke detectors or sound and light alarms, the wireless vibration detectors will receive signals and generate vibration alarms, effectively reminding you

Specification:
Operating voltage： DC3V battery
Static current <6uA
Alarm current <80mA
Alarm indicator LED & vibration
Wireless frequency:433Mhz
Wireless distance: Indoor 20m, outdoor 200m
Working Temp -10℃-60℃
Battery life: < 2 years
Humidity 0-80%RH(no congelation)
Installation Place on a table or pillow
Dimension 112mm*21mm

Operations
1 Power on Make sure the vibration detector is powered on by 2 pieces of DC1.5V battery. The LED will flash 3 times and the detector will come into normal working status.
2 TEST: Press the button, the red LED will flash and the detector will vibrate, and the smoke detector that is already interlinked with the vibrator will sound at the same time. The testing period is about 15 seconds. Pressing the button
can again stop the vibration. You can only test it again after 12 seconds.
3 Pairing: Same pairing process with interconnected smoke detectors.
First, press and hold the button on device 1 that is waiting to be paired, after the red light flashes twice, release it.
If the detectors are already interlinked with other devices, the red led will flash slowly about three times. if it is not interlinked to your target device, you can clear the pairing according to the instruction in step

4. If device one has not been linked before, the red led will flash for about 2 minutes, which means waiting for parking. Next, press and hold the button on device 2 that is prepared to be connected to device 1, after the red
The light flashes and the device vibrates three times, releasing it.

Click below to learn more about the detectors that can be interlinked with the siren

Clear Matching: Press and hold the button after the red light flashes and the device vibrates four times, then release it. waiting for the light to flash 3 times, and clear successfully.

Alarming: When the vibration detector receives the signal from another interlinked device Clear Matching: Press and hold the button after the red light flashes and the device vibrates four times, release it. waiting for the light to flash 3 times, and clear successfully.

Low Battery: The vibration detector will vibrate and flash every 1 minute when the battery voltage is less than 2.6 volts.

Wireless interconnected smoke alarm

WiFi-interconnected smoke alarms with mobile app notifications optional.  Click here for more information

Wireless interconnected carbon monoxide detector 

Contact me to get the price list.

wireless interconnected smoke alarm system

As a smoke detector manufacturer that has focused on smoke alarm manufacturing since 2007. Stand alone for 10 years smoke detectors, Wifi/Zigbee smoke detectors, Lora smoke detectors, NB-IoT smoke detectors. Carbon monoxide detectors are all available.

OEM service is welcomed. You can e-mail us with your requirements.