Alarm Panel Receiver

The alarm panel receiver is an innovative solution that allows you to integrate smoke alarms into any existing home security system. With its advanced technology, the receiver provides a comprehensive and seamless solution for monitoring smoke and fire risks in your home.

One of the key features of the alarm panel receiver is its ability to connect multiple smoke alarms using just one interface receiver. This means that you can easily connect all of your smoke alarms to your existing home security alarm panel, eliminating the need for multiple receivers and simplifying the monitoring and control process.

The alarm panel receiver is designed to be compatible with any existing home security system alarm panel, making it easy to integrate with your current system without the need for additional hardware or complicated installation. Additionally, the receiver is interconnectable with up to 20 other smoke alarms, providing crucial coverage for larger homes and properties.

With the alarm panel receiver, you can rest assured that your home is protected against the risks of smoke and fire. Its easy-to-use interface, seamless integration with existing security systems, and advanced technology make it the perfect solution for any homeowner looking to enhance the safety and security of their home.

The alarm panel receiver provides a comprehensive, reliable, and easy-to-use solution for integrating smoke alarms into any existing home security system. With its advanced technology, interconnectivity, and compatibility with existing alarm panels, the receiver is the ultimate tool for keeping your home safe and secure.

Operation Method:

1. Match code:

Hold the learning button and the learning indicator light blinks, then press the buttons of the remote control, if the indicator lights flash 3 times, match the code successfully. Maximum of 20 remote controls can be matched.

Pls, note that AJ-K103 can learn any data code. It means it can be controlled by whichever button you press on the remote while matching.

2. Delete code:

Hold the learning button till the indicator LED lights and then off, and delete successfully.

3. Set working mode:

S1 & S2 program the sequence as follows:

Jumper on S1→ Toggle

Jumper on S2→ Latching

No Jumper on S1 &S2→ Momentary

Tech Data：

DC 12V 1-Channel Remote Control Switch AJ-K103

Working Mode:

1. Momentary: Press remote button A, and the corresponding relay on the receiver is on; release button A, and the relay is off, the same as others.
2. Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.
3. Latching: Press remote button A, the relay A is on, and B is off. Press button B, the replay B is on, and A is off.

Wiring Way & Diagram:

B=Normally Closed, G=Common, K=Normally Open.

alarm panel interface receiver