AJ-R106 Wireless Interconnected Remote Controller


  • RF433mhz Wireless Interconnected
  • Battery-powered, Easy for installation
  • Test and Silence the detectors
  • 14 years of smoke detector manufacturer
  • AJ-R106


Wireless Interconnected Remote controller

The wireless interconnected remote controller is a supplementary device that can work with the wireless interconnected smoke alarms, interconnected carbon monoxide detectors, wireless heat alarms,  and so on.  The main function of the remote controller is to “Test” and “Silence” the interconnected wireless detectors.

According to the regulation, the detectors should be tested every week to make sure the detectors are still working properly.

By installing the remote controller on the wall, you can easily test the smoke alarm by simply one pressing the “TEST” button on the remote controller. You don’t have to take a swabber or rod or sticker to press the detectors on the ceiling.

The wireless remote controller is powered by a DC12V small Alkaline battery and is cable-free. the battery life is about 2-3 years. There is a backup bracket for easily be installed in the wall.

Ad there is the “Hush” button on the remote controller. When there is a false alarm, or you have solved the fire situation, you can easily press the “HUSH” button to make the detector silent.

The silence function is available only when the detector is triggered, rather than being tested. Do not press the “Hush” button when you are just testing the detectors. The detectors will be silenced after the testing, which takes about 8-15 seconds.

When one of the detectors is triggered, all the detectors in the group will sound at the same time. Pressing the “Hush” button, all the detectors will keep silent, except the detector that detected the real fire. So that you can easily know which floor or which area is one fire.

This wireless remote controller is just an optional device. You can test the detectors by press the testing button on the detectors as well.

Click below to know more about the detectors that can be controlled by the remote controller.

Wireless interconnected smoke alarm

WIFI interconnected smoke alarms with mobile App notification optional.  click for more information

Wireless interconnected Carbon monoxide detector 

Contact to get the price-list.

As a smoke detector manufacturer that focused on smoke alarm manufacture since 2007. Stand alone 10 years smoke detector, Wifi/Zigbee smoke detector, Lora smoke detectors, NB-IoT smoke detectors. Carbon monoxide detectors are all available.

OEM service welcomed. You can e-mail us freely with your requirements.

Additional information

Weight N/A


technical parameter

Interconnected smoke alarm

Voltage DC3V
Standby Current <10uA
Alarm Current <60mA
Working Temperature -10℃~+50℃
Relative Humidity ≤95%RH
Wireless Signal 433.92Mhz GFSK
Low battery alarm threshold 2.5±0.1V
Alarm Sound pressure ≥85dB
RF Distance >25m
Alarm Mode Siren with flash
Execute Criterion EN14604:2005 AS3786:2014

WIFI Interconnected smoke alarm

Working Voltage DC3V battery(not replaceable)
Standby current <12uA
Alarm current <35mA
Low voltage threshold 2.7V
Battery lifespan 10 years
Alarm sound  >85dB
Alarm mode LED flashes& Buzzer
Fire protection grade V-0
Certification EN 14604:2005/AC:2008
Product lifespan 10years
Working Voltage DC6V(Replaceable)
Low voltage threshold 5.2V
Battery lifespan >3 years
Wireless frequency 2.4GHz
Max RF power +20dBm
Wireless frequency 433MHz GFSK
APP TUYA Smart& Smart Life
Alarm mode LED flashes& APP notify
Execute Criterion EN 300 328 V2.1.1 (2016-11)
Product  lifespan 10 years


There are no reviews yet.

Be the first to review “AJ-R106 Wireless Interconnected Remote Controller”

Your email address will not be published. Required fields are marked *

Go to Top