Anka AJ710 series Hard-wired smoke alarms are a crucial safety feature in Australian homes, providing a reliable, 240-volt mains-powered system that is legally required in many circumstances. These systems must be installed by a licensed electrician and include a battery backup, ensuring they continue to function during a power outage.
Why Choose Hard-Wired in australia?
Reliability: They are connected to the electrical grid, reducing the risk of a dead battery preventing the alarm from working.
Safety Interconnection: When one alarm detects smoke, all units connect to sound at once, offering better protection.
Compliance: They are essential for meeting state-based fire safety laws.
Top Brands & Products in Australia about hardwired smoke alarms:
Anka Security: Primarily supply intelligent smoke and gas detectors, certified by Australian AS3786. Our photoelectric detection alarm systems have a 10-year lifespan and can be connected wirelessly and via smartphones..
Clipsal: Known for Fire Tek smoke alarms, offering 240V mains-powered models and wireless 10-year battery units, often with RF interconnection.
Red Smoke Alarms: A rapidly growing Australian brand focusing on hard-wired, interconnected smoke alarms, and heat alarms.
PSA Lifesaver: A trusted name offering a wide range of mains-powered or battery-operated, interconnectable units.
Brooks Australia: Provides a variety of photoelectric mains-powered alarms suitable for Australian standards.
Legal Requirements for hardwired smoke alarms in australia:
New Dwellings/Renovations: All homes built after August 1997, or undergoing significant renovations, are required to have hard-wired smoke alarms.
Interconnection: New homes and major renovations (post-2014) often require interconnected alarms, meaning if one sounds, all alarms in the house sound simultaneously.
Qld Specifics: Queensland regulations (Building Regulation 2021) mandate hard-wired and interconnected alarms, with strict requirements to have them in every bedroom, hallways, and on every level.
Replacements: If your existing alarm is faulty or over 10 years old, it should be replaced with a similar type (hard-wired, if it was originally).
Standards & Technology for hardwired smoke alarms in australia:
Photoelectric: All smoke alarms must comply with AS3786:2014, with photoelectric alarms being the preferred, more reliable technology over older ionisation types.
Battery Backup: Hard-wired alarms must have a 9-volt alkaline or rechargeable lithium battery backup.
Lifespan: All smoke alarms have a maximum service life of 10 years.
