Place combination smoke and carbon monoxide detectors on every floor of your home, in every bedroom, and in hallways outside sleeping areas. Mount them on the ceiling or high on a wall, with the sensor within 12 inches of the ceiling, and keep them at least 10-15 feet away from fuel-burning appliances like furnaces and stoves to prevent false alarms.
Anka Security analyzes your smoke and carbon monoxide detector placement guide.
On every floor: Install at least one detector on every floor, including the basement.
Near sleeping areas: Place a detector in each bedroom and in hallways near sleeping areas.
Hallways: If hallways are long (over 40 feet), place a detector at each end.
At the top and bottom of stairs: Install one at the top of stairs leading to upper floors and at the bottom of stairs leading to the basement.
Specific locations to avoid for smoke and carbon monoxide detectors:
Near appliances:
Do not place detectors directly above or next to fuel-burning appliances, as this may cause false alarms when the appliances are activated.
Draft areas:
Avoid placing detectors near windows, doors, or vents, as drafts can interfere with their ability to detect smoke or CO. “Dead Air” Spaces:
Avoid placing the device in corners or near obstructions that could block the sensor, such as curtains or furniture.
Why choose these locations for smoke and carbon monoxide detectors?
Smoke:
Smoke rises, so placing the detector high on the wall or ceiling ensures it’s one of the first to detect a fire.
Carbon Monoxide (CO):
CO is slightly lighter than air and mixes well with air, so it can still be effectively detected from a high position.
Whole-Home Protection:
These locations offer the most comprehensive protection, ensuring detection in critical areas where fires and carbon monoxide leaks are most likely to occur and pose the greatest danger.
Leave A Comment